Description
General Information For Molds with Posts:
- When preparing the mold with glass separator, make sure to cover every angle, especially if using a spray-on product
- If using a liquid separator such as kiln wash, make sure to give it ample time to dry before adding any frit
- If using frit, make sure the top of the post is uncovered before firing by brushing away excess glass
- When de-molding, wait until the mold is completely cool, then invert over a soft surface and gently thump it on the back if necessary
- Never try to pry the glass loose, as this may cause the post to break off
-
-
-
-
-
-
- Creative Paradise Inc.
-
-
-
-
-
-
Mold Size: 8.5″ L x 4.5″ W
Casting Size: 7.25″ and 5.5″ L
Fill Weight: Large – 60 grams, Small – 40 grams
Refer to the table below for a suggested Full Fuse schedule for COE96 glass:
| Segment | Rate | Temp (F) | Hold |
| 1 | 300 | 1150 | 45 |
| 2 | 150 | 1300 | 20 |
| 3 | 400 | 1460 | 10 |
| 4 | 9999 | 950* | 60 |
*If using COE90, adjust this temperature to 900
Refer to the table below for a suggested Tack Fire schedule for COE96 glass:
(If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4″ full)
| Segment | Rate | Temp (F) | Hold |
| 1 | 300 | 1150 | 45 |
| 2 | 150 | 1300 | 20 |
| 3 | 400 | 1410 | 10 |
| 4 | 9999 | 950* | 60 |
*If using COE90, adjust this temperature to 900
Reviews
There are no reviews yet.